1. Úvod
The Zuomeng Septic Pump Alarm (Model ZM-006) is designed to provide reliable high water level detection for sewage pits, septic tanks, sump pumps, water tanks, and lift stations. This system alerts you to rising water levels through an audible alarm and a flashing light, helping to prevent potential flood damage to your property. It can also be configured to activate an external submersible pump for drainage.
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Zuomeng Septic Pump Alarm.
Obrázok 1: Koniecview of the Zuomeng Septic Pump Alarm and its application in preventing flood threats.
2. Bezpečnostné informácie
Pred inštaláciou a prevádzkou si pozorne prečítajte všetky bezpečnostné pokyny. Nedodržanie týchto pokynov môže mať za následok úraz elektrickým prúdom, požiar alebo vážne zranenie.
- Elektrická bezpečnosť: Ensure all power is disconnected before performing any installation or maintenance. All wiring should be performed by a qualified electrician in accordance with local electrical codes.
- Komponenty s certifikáciou UL: The wiring and circuit breaker are UL certified, ensuring compliance with international safety standards.
- Odolné voči poveternostným vplyvom Casing: The alarm unit features an IP67-rated weatherproof casing, suitable for both indoor and harsh outdoor conditions. However, ensure the casing is properly sealed after any internal access.
- Pump Overload Protection: If connecting an external pump, ensure the pump has internal overload protection.
- Deti a domáce zvieratá: Keep the alarm unit and its components out of reach of children and pets.
3. Nastavenie a inštalácia
The Zuomeng Septic Pump Alarm is designed for quick installation with pre-wiring in its internal design. It is suitable for wall mounting.
3.1 Komponenty
- Alarm Control Panel (main unit with flashing light and audible alarm)
- Float Switch (for water level detection)
- Montážny hardvér (napr. clamps)
3.2 Mounting the Alarm Unit
Select a suitable location for the alarm control panel. It should be easily accessible for visual and audible alerts, and protected from direct impact. The unit is wall-mountable. Secure the unit firmly to a stable surface using appropriate fasteners.
Figure 2: The IP67-rated weatherproof casing ensures durability in various environments.
3.3 Float Switch Installation
Install the float switch at the desired high water level in your sewage pit, septic tank, or sump. Ensure the float switch has sufficient clearance to move freely and activate when the water level reaches the alert point. The float switch cable should be routed securely to the alarm control panel.
3.4 Elektrické pripojenia
The alarm system features separated pump and alarm circuits. The unit comes pre-wired internally for ease of installation.
- Napájanie: Connect the alarm control panel to a 120V power source.
- Pripojenie plavákového spínača: Connect the float switch wires to the designated terminals within the control panel.
- External Pump Connection (Optional): If you intend to use the alarm to activate an external submersible pump, connect the pump's power circuit to the designated terminals in the control panel. Refer to the circuit diagram for correct wiring. Ensure the pump has its own internal overload protection.
Figure 3: Product Circuit Diagram. Note: Motor must have internal overload protection.
Figure 4: Multiple Working Modes: 1. Connect the float switch. 2. External submersible pump. 3. Connect the float switch and external water pump.
4. Prevádzka
4.1 Zapnutie
Once all connections are secure and verified, restore power to the alarm unit. The unit will enter standby mode.
4.2 High Water Level Detection
When the water level rises and activates the float switch, the alarm control panel will initiate an alert:
- An audible alarm will sound at 110 decibels.
- A bright warning light will flash.
If an external submersible pump is connected and configured, it will automatically activate to begin drainage.
Figure 5: The alarm features a 110-decibel siren and a bright flashing light for effective alerts.
4.3 Testovacia funkcia
The alarm unit includes a test switch. To test the alarm, activate the test switch. This will simulate a high water event, triggering the audible alarm and flashing light. This function allows you to verify the system's operational status without needing to raise the water level.
4.4 Funkcia stlmenia zvuku
The alarm can be temporarily muted after activation. Refer to the control panel's specific switch or button for muting the audible alarm. The visual alarm (flashing light) typically continues until the water level drops below the float switch activation point.
5. Údržba
Regular maintenance ensures the reliable operation of your Zuomeng Septic Pump Alarm.
- Pravidelné testovanie: Periodically use the test function to ensure the alarm and light are working correctly. It is recommended to test the system monthly.
- Kontrola plavákového spínača: Annually inspect the float switch for any debris, corrosion, or damage that might impede its movement. Clean the float switch and its cable if necessary.
- Casing Inspection: Check the alarm unit's IP67 casing for any cracks or damage that could compromise its weatherproof seal. Ensure all latches are securely closed.
- Kontrola zapojenia: Periodically inspect all electrical connections for tightness and signs of wear or corrosion. Ensure all wiring is intact and properly insulated.
- Čistenie: Keep the exterior of the alarm unit clean. Use a soft, damp cloth to wipe away dust or dirt. Do not use abrasive cleaners or solvents.
6. Riešenie problémov
If you encounter issues with your Zuomeng Septic Pump Alarm, refer to the following common problems and solutions:
| Problém | Možná príčina | Riešenie |
|---|---|---|
| Alarm does not sound or light does not flash when water level is high. |
|
|
| Alarm sounds continuously without high water. |
|
|
| External pump does not activate. |
|
|
| Test function does not work. |
|
|
7. Špecifikácie
Below are the technical specifications for the Zuomeng Septic Pump Alarm ZM-006:
| Funkcia | Špecifikácia |
|---|---|
| Číslo modelu | ZM-006 |
| Voltage | 120 voltov |
| Wattage | 550 watts (for connected pump) |
| Úroveň hluku | 110 decibelov |
| Metóda kontroly | Plavákový spínač |
| Typ montáže | Držiak na stenu |
| Technológia snímačov | Plavákový spínač |
| Hmotnosť položky | 1.61 kilogramu (3.54 libry) |
| Rozmery produktu | 6 x 4 x 5 cm (jednotka alarmu) |
| Hodnotenie IP | IP67 (Weatherproof Casing) |
| Kompatibilné zariadenia | Ponorné čerpadlo |
| Zdroj napájania | Káblové elektrické |
| Zahrnuté komponenty | Clamps, Diffuser, PVC hose, Pond & Lake Aeration System (Note: Some components may vary based on package) |
Figure 6: Product dimensions for the alarm unit and float switch.
8. Záruka a podpora
8.1 Informácie o záruke
The Zuomeng Septic Pump Alarm ZM-006 comes with a 2-ročná záruka od dátumu nákupu. Táto záruka sa vzťahuje na chyby materiálu a spracovania pri bežnom používaní. Nevzťahuje sa na škody spôsobené nesprávnou inštaláciou, zneužitím, nehodami alebo neoprávnenými úpravami.
8.2 Zákaznícka podpora
For technical assistance, warranty claims, or any questions regarding your Zuomeng Septic Pump Alarm, please contact Zuomeng customer support through the retailer where the product was purchased or refer to the contact information provided with your product packaging.
