coolo Zigbee Smart Light Sensor User Manual

Coolo Zigbee Smart Light Sensor

Konfigurácia siete

1. Zapnite produkt
   • Align the opener to the slot
   • Otočte kryt batérie proti smeru hodinových ručičiek, aby ste ho otvorili
   • Remove the battery insulation film to power
2. Stlačte tlačidlo RESET na 3 sekundy a potom ho uvoľnite, červená LED dióda bude blikať pri konfigurácii siete.

Návod na inštaláciu

Inštalačná poloha
Remove the protective film from the adhesive on the base. Stick the device where needed as shown in the following figure.

Pozorne si prečítajte návod a výrobok používajte správne
Ďakujem za nákupasing and using this product. Before using the product, please read the manual carefully and use the product correctly. In order to avoid damage to the equipment, such as all consequences caused by abnormal operation, the company will not bear any responsibility. The pictures in this manual are used to guide the user’s operation and are for reference only. Please refer to the actual product for details.

Popis produktu

Tipy:
This product must be connected to the Zigbee gateway to function properly and upload data to the server/APP

Parametre produktu

• Product Name Zigbee Ambient Light Sensor
• Bezdrôtový protokol Zigbee 3.0
• Detection Range 0~157K Lux
• Battery TypeCR2450
• Standby Current<10uA
• Working Temperature -10 ~ 55 C
• Working Humidity 0% ~ 95%RH
• Product Size Ф 33×16mm