Elitech LogEt 6 záznamník teploty

Bezpečnostné pokyny a opatrenia

Bezpečnostné pokyny
Aby ste zabezpečili správnu inštaláciu a používanie tohto produktu, prečítajte si a prísne dodržiavajte nasledujúce podmienky:

Batéria

• Please use original or technically compatible batteries. Do not use batteries that do not meet product specifications to prevent damage to equipment or other malfunctions.
• Do not disassemble, squeeze, hit, or heat batteries privately, and do not place batteries in fire, as this may cause battery explosions and fires

Externé napájanie:

• When external power supply is required, please use the power adapter configured for this device.
• Do not use other power adapters that do not meet the external connection technical specifications, otherwise it may damage the instrument and equipment, and even cause a fire power supply.

Vybavenie

• In flammable and explosive gas environments, please use this equipment in accordance with compliance requirements; otherwise, it may cause explosions and fires
• During the use of the device, if the device emits a burnt or other odor, the power supply should be immediately cut off and the manufacturer or supplier should be contacted in a timely manner

Pozornosť

• If the equipment is not used for a long time, it should be removed and stored in the packaging box in a dry and cool environment
• Users are not allowed to make any unauthorized changes to this device. Any unauthorized changes may affect the accuracy of the device and even damage it
• Nepoužívajte zariadenie v náročných podmienkach, aby ste predišli skratom, popáleninám a iným poruchám spôsobeným nepriaznivými poveternostnými podmienkami, ako sú dážď a blesky.
• When the recorder is offline (no data upload), please confirm the networking status of the device
• Používajte v rámci meracieho rozsahu záznamníka.
• Please mistakenly place the external probe directly in a liquid environment to avoid equipment damage
• Netlačte na tento rekordér silou.
• The measured values of the recorder may be affected by the following factors

Chyba teploty
Placed in the measurement environment for too short a stable time Close to heat sources, cold sources, or directly in a water soaked state

Chyba vlhkosti

• Placed in the measurement environment for too short a stable time
• Long term exposure to steam, water mist, water curtains, or condensation environments

Znečistenie:

• Pobyt v prašnom alebo inom znečistenom prostredí

Koniec produktuview a vzhľad

LogEt 6 is a disposable dry ice recorder with a built-in probe. Equipped with ultra-low temperature sensors as standard, the entire machine can directly record temperature in an environment of -85 ° C. It can export reports or automatically generate PDF files through data center software, with 16000 sets of storage, 30 days of battery life, 2 years of shelf life, and support for shadow data function before and after. Widely used in freezers, medical insulation boxes, laboratories, and other scenarios.

1. USB rozhranie
2. LED
3. LCD obrazovka
4. Tlačidlo Stop
5. tlačidlo Štart
6. External probe interface (reserved)
7. Držiak batérie

1. max/min/avr/MTK/log quantity
2. horná hranica
3. nižší limit
4. pracovnom stave
5. úroveň batérie
6. Temperature/humidity values
7. dátum
8. čas

Model list and specifications

Zoznam modelov

Model	ZAREGISTROVAŤ 6
konfigurácia	PT
probe Type	Built in ultra-low temperature (dry ice)
Main sensor parameters	snímač teploty
Rozsah merania teploty	-85 ℃ - 50 ℃
Presnosť merania teploty	±0.5℃（-20℃~40℃）；±1℃（other）
Teplotné rozlíšenie	0.1 ℃

Špecifikácie

Skladovacia kapacita	16000
Dátové rozhranie	USB A
Batéria	LS14250 lithium battery
Čas použiteľnosti	2 roky
Výdrž batérie	30Days（log interval5min）
Communication module/mode	USB rozhranie
Stupeň ochrany	IP65
Product dimensions (height*length*width)	100*46*19mm
Hmotnosť	60 g
Pracovné prostredie	-85˚C～50˚C
Fyzické tlačidlá	Štart/Stop
Alarmová metóda	LED
Adaptation software	Elitechlog

Návod na obsluhu

Kľúčové funkcie
Start button: In normal display mode, press the start button to display the current temperature, and continue pressing to switch temperature data, date and time, number of records, maximum value, and minimum value; Press and hold for 5 seconds to start recording; Stop button: Long press for 5 seconds to stop recording;

Legend status indication

Softvérová prevádzka

Stiahnite si softvér
Download and install the “Jingchuang Data Center” software www.e-elitech.com/xiazaizhongxin (China), www.elitechlog.com/software (iné krajiny)

Čítanie údajov

1. Connect the computer using a USB interface
2. Open the “Jingchuang Data Center” and wait for the link to complete.
3. Open the PDF file directly on my computer or open the summary/historical data of “Jingchuang Data Center” to view údaje.

Poznámky
Data can be directly read without the need for the “Jingchuang Data Center” software After the device is taken out of a low-temperature environment, it needs to be left to stand for a period of time and wait for it to return to room temperature before the LCD screen displays data

Exportovať údaje
Click on Summary/Historical Data, select Export Data, and choose the format to export

Zoznam príslušenstva

• Host * 1, instruction manual (electronic version), calibration certificate (electronic version)

Záručný a popredajný servis

Záruka na produkt: 1 rok
This product can be returned, replaced or repaired within 7 days from the date of purchase due to performance failure. The warranty period is one year from the date of purchase (based on valid purchase receipts). During the warranty period, any malfunctions caused by quality problems of the product under normal use will be repaired free of charge. The shipping cost for repairing the product shall be borne unilaterally by the sender.

If any of the following situations are met, it is not within the scope of the after-sales guarantee:

1. Damage caused by force majeure, such as earthquakes, fires, floods, typhoons, etc;
2. Damage caused by human factors, such as improper use, maintenance, and storage by consumers.
3. Damage caused by maintenance, disassembly, etc. by non-precision service personnel or authorized service providers;
4. Exceeding the warranty period and scope;
5. Natural wear and tear, consumption, and aging of products (such as shells, cables, etc.).

často kladené otázky

Otázka: Čo mám robiť, ak zariadenie vydáva nezvyčajný zápach?
A: Immediately disconnect the power supply and contact the manufacturer or supplier for assistance.

Otázka: Ako spustím nahrávanie na zariadení?
A: Press and hold the Start button for 5 seconds to initiate recording.

Dokumenty / zdroje

Elitech LogEt 6 záznamník teploty [pdfNávod na obsluhu 01, 02, Záznamník údajov o teplote LogEt 6, LogEt 6, Záznamník údajov o teplote, Záznamník údajov, Záznamník

Referencie

• Používateľská príručka