Serverové pamäťové moduly DDR4
“
špecifikácie:
- Typ pamäte: DDR4 Server Memory (Registered
ECC) - Dostupné kapacity: 8 GB, 16 GB, 32 GB
- Dostupné frekvencie: 2133 MHz, 2400 MHz
- Voltage: 1.2 V
- Konfigurácia pinov: 288-pin ECC (Error
Correcting Code) - Oprava chyby: Yes (Includes Register
between DRAM and Memory Controller) - CAS Latency: CL15-17 (depending on
frekvencia) - Faktor tvaru: DIMM (Dual In-line Memory
modul) - Prevádzková teplota: Kompatibilita
- Kompatibilita: Server motherboards and X99
chipset motherboards only
Návod na použitie produktu:
Návod na inštaláciu:
- Power Down the System: Vypnite server
completely and disconnect all power cables from the power
zásobovanie. - Otvorte šasi servera: Remove the server
cover according to the manufacturer’s instructions to access the
základná doska. - Locate Memory Slots: Identify the memory slots
on your server motherboard. Consult your motherboard manual for
optimal slot population order. - Release Retention Clips: Open the retention
clips at both ends of the memory slot by pushing them outward. - Align the Memory Module: Align the notch in
the memory module with the key in the memory slot to ensure proper
orientácia. - Install the Memory: Firmly press down on the
memory module until the retention clips snap into place
automaticky. - Repeat for Additional Modules: Ak inštalujete
multiple modules, repeat the process for each module, following the
motherboard’s recommended population sequence.
FAQ:
Q: Can this memory be used in standard desktop
základné dosky?
A: No, this memory is specifically designed for server
motherboards and X99 platform motherboards. Attempting to use it in
standard desktop motherboards may result in system failure or
škody.
Q: What processors are recommended for use with this
pamäť?
A: This memory is optimized for use with Intel Xeon E5-2600
v3/v4 series processors.
Q: How should I configure the memory for optimal
výkon?
A: Install memory in identical pairs for dual-channel operation,
populate memory slots according to motherboard manufacturer
guidelines, and ensure all memory modules in a system have matching
specifications for best stability.
“
KLLISRE Server DDR4 Memory
Stiahnutie používateľskej príručky a inštalačnej príručky ako dokument Word
Koniec produktuview
KLLISRE Server DDR4 Memory modules are designed for high-performance server applications, offering reliability, stability, and efficiency for data-intensive workloads. These modules are specifically engineered for server environments and compatible server motherboards.
Important Compatibility Notice: This is server-grade memory designed specifically for server motherboards and X99 platform motherboards. It is NOT compatible with standard desktop motherboards. Attempting to install this memory in incompatible systems may result in system failure or damage.
Špecifikácie
Špecifikácia Typ pamäte Dostupné kapacity Dostupné frekvencie Objemtage Pin Configuration Error Correction
Registrovaný
Details DDR4 Server Memory (Registered ECC)
8 GB, 16 GB, 32 GB
2133 MHz, 2400 MHz
1.2V 288-pin ECC (Error Correcting Code) Yes (Includes Register between DRAM and Memory Controller)
CAS Latencia
CL15-17 (depending on frequency)
Form Factor
DIMM (dvojradový pamäťový modul)
Prevádzková teplota
0 °C až 85 °C
Kompatibilita
Server motherboards and X99 chipset motherboards only
Kompatibilné komponenty
Warning: This memory is NOT compatible with standard desktop motherboards. Attempting to use it in incompatible systems will result in failure to boot.
Odporúčané základné dosky
KLLISRE Server DDR4 Memory is compatible with the following platforms: Server motherboards with Intel C612, C622, C236 chipsets X99 chipset motherboards (for Xeon processors) Motherboards specifically designed for Xeon E5 v3/v4 processors Select server/workstation platforms with DDR4 Registered ECC support
Odporúčané procesory
This memory is optimized for use with: Intel Xeon E5-2600 v3/v4 series processors
Konfigurácia pamäte
Pre optimálny výkon:
Install memory in identical pairs for dual-channel operation
Populate memory slots according to motherboard manufacturer guidelines
Ensure all memory modules in a system have matching specifications for best stability
Inštalačná príručka
Warning: Always handle memory modules by the edges. Avoid touching the gold contacts or components on the circuit board. Static electricity can damage the memory, so use an anti-static wrist strap when handling components. 1 Power Down the System Shut down the server completely and disconnect all power cables from the power supply.
2 Open the Server Chassis Remove the server cover according to the manufacturer’s instructions to access the motherboard.
3 Locate Memory Slots Identify the memory slots on your server motherboard. Consult your motherboard manual for optimal slot population order.
4 Uvoľnite poistné klipy Otvorte poistné klipy na oboch koncoch pamäťového slotu ich zatlačením smerom von.
5 Zarovnajte pamäťový modul Zarovnajte zárez v pamäťovom module s výstupkom v pamäťovom slote, aby ste zabezpečili správnu orientáciu.
6 Nainštalujte pamäť Pevne zatlačte na pamäťový modul, kým sa poistné klipy automaticky nezacvaknú na miesto.
7 Opakujte pre ďalšie moduly Ak inštalujete viacero modulov, zopakujte postup pre každý modul podľa odporúčaného poradia osádzania základnej dosky.
8 Close the System Replace the server cover, reconnect all cables, and power on the system.
Note: After installing new memory, it’s recommended to enter the system BIOS/UEFI to verify that all memory is detected and operating at the correct specifications.
Riešenie problémov
Systém sa po inštalácii nespustí
Possible causes: Incompatible motherboard, improperly seated memory, mixed memory types.
Solutions: Verify motherboard compatibility, reseat memory modules, ensure all memory modules are identical, clear CMOS.
Zistená iba čiastočná pamäť
Možné príčiny: Nesprávne osadená pamäť, nekompatibilná pamäť, chybný pamäťový slot.
Riešenia: Znovu vložte pamäťové moduly, pozrite si manuál k základnej doske, kde nájdete správne poradie osadenia, vyskúšajte moduly v rôznych slotoch.
Nestabilita alebo pády systému
Možné príčiny: Nekompatibilné nastavenia časovania pamäte, prehrievanie, nedostatočný výkon.
Solutions: Load BIOS optimized defaults, ensure proper system cooling, verify power supply adequacy.
Error Messages Related to Memory
Possible causes: ECC errors, configuration issues.
Solutions: Check BIOS settings for ECC support, update motherboard BIOS to latest version, test modules individually.
Memory Not Running at Advertised Speed
Possible causes: BIOS settings, CPU memory controller limitations.
Solutions: Enable XMP/profile in BIOS if supported, update BIOS, check CPU specifications for supported memory speeds.
Poznámka: Ak problémy pretrvávajú, otestujte každý pamäťový modul jednotlivo, aby ste identifikovali potenciálne chybné moduly. Ak máte podozrenie na chybný produkt, kontaktujte podporu KLLISRE.
Informácie o záruke
KLLISRE Server DDR4 Memory modules are covered by one year warranty. The warranty covers defects in materials and workmanship under normal use. Proof of purchase is required for warranty service.
V prípade reklamácie alebo technickej podpory kontaktujte podporu KLLISRE s údajmi o vašom nákupe a popisom problému.
Táto záruka sa nevzťahuje na škody spôsobené nehodou, nesprávnym použitím, zneužitím, nesprávnou inštaláciou alebo neoprávnenými úpravami.
© 2023 KLLISRE. All rights reserved. KLLISRE is a registered trademark. Specifications are subject to change without notice.
Dokumenty / zdroje
 |
KLLISRE Server DDR4 Memory Modules [pdfPoužívateľská príručka Server DDR4 Memory Modules, DDR4 Memory Modules, Memory Modules, Modules |